Drilling/Completion

• DSAs, Adapter Spools, Drilling and Spacer Spools
• Blowout Preventers (BOP)
• Highline Unit
• Hevi-Wate Drilling Pipe
• Drill Collars
• Drill Pipe

• Premium Tubing
• Double Wall Fuel Tanks
• Ground Heater
• 12' x 48' On-Site Housing
• Compressors & Boosters
• Axle-Mounted Mud Tank -
  Circular Bottom
• Sand Separators

• 8-kW Light Tower
• 20-kW Light Tower

Fluids

• Water Delivery
• Environmental Spill Containment
• Water Pumps
• Matting solutions
• Mobile Boiler Unit
• Frac Tanks

• • Sizes from 2 1/6” to 13 5/8”
• • Pressure range: 500 psi to 15m

• • Sizes from 7 1/16” to 30”
• • Pressure range: 5m to 15m

• • All electrical connections are controlled access
• • Voltage regulators and connections enclosed behind panels
• • Incoming Power – 12.5 kV or 25 kV to electronic switch for trip protection and safe on/off operations
• • Transformer steps down to 600 volts
• • 4,000 A main switch for rig power – outgoing secondary power outlets behind panel

• • Sizes from 3 1/2” to 5”
• • Conventional and spiral

• • Sizes from 3 1/8” to 10”
• • Spiraled or slick

• • Sizes from 2 7/8” to 5”
• • Grades X95,G105 and S135
• • Premium high-torque connection available
• • Includes all associated handling tools

• • Sizes from 2 3/8” to 3 1/2”
• • Grades L-80 through P-110 available

• • 10,000-gallon and 13,800-gallon tanks available
• • Horizontal, double wall and skidded built with 12” x 45” I-beam for strength
• • Built to UL 142 Standards
• • Fire safety shutoff valves on all outlets below fuel level
• • Dual Roper diesel pumps with double filters for redundancy
• • 3” fill line with lockable catch box and appropriate valving
• • Explosion proof electrical conduit and motor starters
• • Catch pan on skid to store all fueling equipment
• • Tank gauging and level indicators

• • 860,000 BTU
• • Remote hose manifold
• • Booster pump

• • Each house is equipped with standard appliances

• • Variety of IR compressors and boosters ranging from Sullair 1150 to IR1170 and Gardner Denver
  two-stage boosters
• • Compressors - 1150 and 1170 cfm at 350 psi discharge
• • Boosters - 3790 cfm to 5950 cfm flow range at 600 psi to 1,400 psi discharge

• Wheel axle allows easy transportation with winch truck.
• • Built-in fall protection
• • Easy-access platform
• • 500 BBL, double manifold with 6” internal gun line
• • Matching manifold pump system
• • Ideal for extended life oil-based mud
• • Skid mounted mud tank

• • 2” 1502 unions in and out
• • 10,000 psi ratings

• • Wide and narrow body with three leveling jacks for wide, safe stance
• • 8-kW generator end with a voltage regulator for clean, dependable power
• • 20 amp 120 volt GFCI receptacle
• • 70-gallon fuel tank for extended run times

• • 20-kW generator end with a voltage regulator for clean dependable power
• • 20 Amp 120 V GFCI receptacle
• • 30 Amp 120 V RV plug
• • Two 50 Amp 240 V RV plugs
• • 30 Amp 240 V twist lock
• • 70-gallon fuel tank for extended run times

• • Long-range water transfer: 20 to 120 bbl/minute can be delivered from any adequate water source
  multiple miles away from the location in areas with up to a 2,000 foot rise in elevation.
• • High-rate frac transfer: 120 bbl/minute can be delivered from an on-site source.

• • Constructed from XR-5 geomembrane
• • Side wall height from 4” to 12”
• • Sizes from 8’ x 14’ to 65’ x 65’
• • Replacement bottoms

• Trailer-mounted 6’ x 6’ pump
• • John Deere 45L
• • Maximum head of 160’ and maximum flow of 2,800 GPM

• Skid-mounted 8’ x 6’ high pressure pump
• • High-flow water transfer pump with 8” suction and 6” discharge
• • John Deere 6135 600 HP diesel engine on a 270-gallon fuel tank
• • Maximum head of 650’ and maximum flow of 4,200 GPM
• • Available with sound attenuated

• Skid-mounted 10’ x 8’ high pressure pump
• • High-flow water transfer pump with 10” suction and 8” discharge
• • John Deere 6090 325 hp diesel engine on a 170-gallon fuel tank
• • Maximum head of 350’ and maximum flow of 5,500 GPM

• HL 250M 12’ x 10’ 440 HP pump
• • Flow rate to 5,700 GPM
• • Dynamic head up to 390 feet or 150 psi

• HL 226M 10’ x 8’ 300 HP pump
• • Flow rate to 3,600 GPM
• • Dynamic head up to 380 feet or 185 psi

• CD 150 6’ x 6’ pump
• • Flow rate of 1,700 GPM
• • Dynamic head up to 160’ or 60 psi

• • Engineered with consistent strength properties
• • Interlocks to provide even weight distribution
• • Conforms to uneven terrain
• • Stands up to extreme weather

• • 10 million BTUs
• • 75 BPM
• • 8° rise 2,500 barrels/hr

• 500 BBL
• • Flat top and slope top available
• • 8” external or internal manifold system
• • Easy access platforms
• • 3” or 6" over-the-top fill line